PPC

Microsoft Ads Smart Bidding Rebuild: What It Means for PPC Management

Microsoft Advertising is rolling out rebuilt Smart Bidding models automatically. Here is what changes for tCPA and tROAS campaigns and what I would check first.

November 20, 2026
·
Andras Igaz, Nextbit Digital

Microsoft Advertising is rolling out rebuilt Smart Bidding prediction models. They switch on automatically, so your campaigns may start spending differently before you touch anything. For PPC management, that means watching budget pacing and target behaviour over the next few conversion cycles, and making sure your conversion values are accurate, especially if you bid on Target ROAS.

Key takeaways

  • Microsoft Advertising is rolling out rebuilt Smart Bidding prediction models automatically, so campaigns can spend differently before you change anything.
  • Microsoft says bids now react to CPA or ROAS target changes nearly twice as fast, and budgets ramp up sooner and more evenly.
  • Microsoft reported 10% more conversion value per click at roughly the same ROAS, based on its August 2026 global data.
  • Conversion-based bidding can start from 5 conversions, but Microsoft recommends about 30 conversions in 30 days to judge performance.
  • The biggest gains came from advertisers sending actual transaction values, so check your conversion values before moving to Target ROAS.

Contents

What changed in Microsoft's Smart Bidding models?

Microsoft rebuilt the models that predict whether an ad click will convert and what that conversion might be worth. Smart Bidding is the group of automated bid strategies, such as Target CPA and Target ROAS, that set a bid for each auction based on those predictions. The new models use more signals to make them.

Microsoft calls it its "biggest bidding model upgrade in a decade". The rollout was announced on November 18. It reaches accounts automatically, and Microsoft plans more bidding updates in 2027.

The automatic rollout is the part I would pay most attention to. If spend or CPA moves in the coming weeks, the cause may be the new model rather than anything your team changed. I would log the rollout in your change history so you can separate the two later.

How will existing tCPA and tROAS campaigns behave?

Microsoft expects campaigns to spend faster and track their targets more closely. Target CPA (tCPA) bids towards an average cost per conversion. Target ROAS (tROAS) bids towards a return on ad spend based on conversion value.

According to Microsoft, three things can change in existing campaigns:

  • Budget pacing: campaigns can reach their full budgets sooner and spend more evenly through the day.
  • Target changes: when you raise or lower a CPA or ROAS target, bids can adjust nearly twice as fast.
  • Performance against targets: campaigns can hit targets more consistently without giving up conversion volume or value.

Max CPC caps can work against the model

A max CPC cap can block bids the model would otherwise place. In Microsoft's example, an advertiser averages $3 a click and caps bids at $5. The cap rules out a $6 bid, even if the model expects that click to convert within a $50 CPA target. In my experience, caps set years ago are often forgotten, so this is worth checking.

Faster bidding does not shorten your conversion lag

Bids react faster, but your customers do not buy faster. If buyers usually take a week, raising a CPA target on Monday tells you by Friday what Monday's clicks cost, but not all the sales they brought. A conversion cycle is the usual time between the click and the conversion, and it sets how soon you can judge any change.

Change you makeMicrosoft's guidance
Raise CPA target or lower ROAS targetChange in 15% steps, review each after one conversion cycle
Switch bid strategyAllow one to two conversion cycles
Add a conversion goalAllow one to two conversion cycles

Loosening a target can open up auctions the campaign used to skip. That is why Microsoft suggests small steps: a larger jump makes the performance swing harder to read.

How many conversions do you need for automated bidding?

Microsoft recommends conversion-based bidding once the account has at least five conversions. Those conversions can come from campaigns you already run, so a new campaign does not need to start from zero.

If the account has fewer than five, Enhanced CPC is the option Microsoft points to. Enhanced CPC (ECPC) keeps your manual bids but lets the system raise or lower them based on the chance of a conversion.

Starting and judging are different thresholds. For judging performance, Microsoft recommends around 30 conversions in 30 days at the campaign or portfolio level. On LinkedIn, Microsoft Ads Liaison Navah Hopkins added that every account is different, and that the 30-day evaluation period and few changes still apply for lower-volume accounts.

A low-volume campaign can finish its first month without enough data to judge the switch. If your account is in that position, I would consider a portfolio bid strategy across similar campaigns, so the evaluation rests on pooled conversions rather than a handful per campaign.

Are your conversion values good enough for tROAS?

Value-based bidding only works as well as the values you send. According to Microsoft, its largest gains came from advertisers who sent actual transaction values, not fixed ones.

Microsoft's internal figures, from August 2026 global Search and Audience Network data:

  • Advertisers on Maximize Conversion Value or Target ROAS saw 10% more conversion value per click at roughly the same ROAS after the upgrade.
  • Search advertisers who moved from Target CPA to Target ROAS saw 8% more conversion value at a similar ROAS.
  • Advertisers who moved from Enhanced CPC to Maximize Conversions with a CPA target saw 18% more conversions at a similar CPA.

These are Microsoft's own averages, not an independent test. I would treat them as a reason to test, not as a forecast for your account.

For e-commerce, pull a few recent purchases in Microsoft Advertising and compare the reported values with the real order totals. If your purchase goal uses a fixed value, a $40 order and a $400 order look the same to the model, and your reported ROAS is only an estimate. Getting this right is a tracking job before it is a bidding job, and it is where our web analytics and conversion tracking work usually starts.

For lead generation, the value of a lead often becomes clear only after sales qualifies it. Hopkins supported sending an estimate at submission and updating it later through the Conversions API or offline conversion imports. The Conversions API sends conversion data server to server, and offline imports upload results from your CRM. She also advised setting a ROAS target that reflects the values you send.

What I would do now in PPC management

If a campaign already delivers the sales or leads you need at an acceptable cost, I would leave it alone for now. Stable settings make it easier to see what the new model does with your current goals and budget.

For the rest, this is the checklist we are working through on our accounts:

  1. Note the rollout period in your change log and compare spend pacing week over week.
  2. Review max CPC caps on tCPA and tROAS campaigns and remove the ones you cannot justify.
  3. Check reported conversion values against real order totals before switching to tROAS.
  4. For lead gen, agree on the value of a qualified lead with sales before you set a ROAS target.
  5. Change targets in 15% steps and wait at least one conversion cycle between changes.

If you have been adjusting targets mid-week just to smooth out spend, watch whether delivery settles on its own. If it does, you can save target changes for when the business needs more volume or can pay more per conversion. That is better PPC ad management than reacting to daily pacing. Google Ads costs are moving too, as I covered in rising B2B CPCs on the same keywords, so it is worth reviewing both platforms together.

Whether you run PPC services in-house or with a PPC company, ask now who owns conversion values and change logs. If you want a second opinion on your Microsoft Ads or Google Ads setup, have a look at our PPC management services or get in touch and we can review your bidding and tracking together.

FAQ

Do I need to opt in to Microsoft's new bidding models?

No. Microsoft applies the upgrade automatically as it reaches more accounts, so campaigns can spend differently without any change on your side.

How should PPC management change after the Microsoft Ads bidding update?

In my view, mainly through patience and cleaner data. Change targets in 15% steps, wait at least one conversion cycle, remove unnecessary max CPC caps and check that conversion values match real order totals.

How many conversions do I need for Target CPA or Target ROAS in Microsoft Ads?

Microsoft recommends at least five conversions in the account to start conversion-based bidding. To judge performance, it recommends around 30 conversions in 30 days at the campaign or portfolio level.

Source: Microsoft Rebuilds Its Smart Bidding Prediction Models, Rolling Out Automatically (Search Engine Journal)

← Back to all posts